D-Link’s DPE-301GI 1-Port Gigabit Power over Ethernet (PoE) Injector provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building, such as on ceilings or near entryways, and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal, allowing a single Ethernet cable to carry both data and power to a device. Also known as a “midspan PSE”, the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN, which is the network connection, typically connected to a non-PoE switch or router. The other port is for PoE OUT, which is the connection that provides both power and data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link, although it’s typically placed near the switch/router. Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device. Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W, such as high power 802.11ac APs and IP cameras with PTZ motors, heaters and blowers. Easy to Use Plug-and-Play with no software required Facilitates deployment of PoE devices where power outlets are not available Reduces installation and network equipment costs by eliminating the need for electrical wiring Provides power over existing network cabling to PoE devices such as access points, IP cameras, and IP phones Lightweight, compact and easy to install Gigabit Connectivity 10/100/1000 interface provides flexibility for all types of connections Auto-negotiation on Ethernet ports Reliability Supports 802.3af / 802.3at Overcurrent protection PoE Injector Injects PoE on a cable when use of PoE switch is impractical Delivers power up to 100 meters (328ft)
