S8512-DE-KIT

• Dual voltage 12/24 VDC field selectable
• Selectable Delayed Egress cycles: 15 or 30 seconds
• Selectable Nuisance Delayed Egress: 0~3 seconds
• Fail alarm: may be released upon activation of fire alarm
• Bond sensor feature for remote monitoring
• Optional remote alarm
• Fail-safe: releases instantly when power is disconnected. No residual magnetism

SS-FAILSAFE-3850

• 12vdc Only
• Current Draw: In Rush 0.9A, holding 0.3A
• Form C contact for monitoring
• Relock time delay of 0, 3, 6, 9 seconds
• Bolt Throw of 2/3"
• Faceplate material: Aluminum Alloy
• Special Mounting tabs supplied
• Can be installed in header or the side of jamb
• Cycle test: 500,000
• Dimensions: 8" x 1 1/2" x 1 5/8" deep

SS-HAR-0069

SS-SMB-5075

• Mounts to the wall surface
• Provides easy installation of infinias eIDC32 Intelli-M Ethernet-enabled Door Controllers
• 4.75" W x 4.75" H x 1.625" D (12.0 cm x 12.0 cm x 4.1 cm)

SS-SNSR-180-12-W

• UL and ULC approved
• UL 10C fire rated
• 3″ diameter mounting
• Standard 12″ leads
• Closed loop, normally open (N/O)
• Standard gap up to ½″ on steel
• Self-locking
• Solid one-piece design
• Color: white

SS-SNSR-29-A-W

• UL and ULC approved
• Side-mounted screw terminals
• Closed loop, normally open (N/O)
• Standard gap up to 1″ on steel
• Color: white
• Spacers, covers and screws included

SS-STRK-1430-LH

• ANSI/BHMA A 156.5 (1-1/4" x 4-7/8") fit cutout specification A 115.1 (with slight jamb modification)
• Stainless steel - Made in the USA
• 12 Vac / 12 Vdc
• Frame type: Hollow metal or aluminum jamb
• Corrosion - Resistant Housing and Moving Parts
• Tamper Strength of 1700 pounds
• Latch Opening is Below Center Line (BCL) and opening starts 3/8" below center line
• Cycle Test of 500,000 cycles
• Keeper depth of 5/8", maximum latch projection possible with 1/8" of door/frame clearance 3/4"
• Strike depth of 1.50" overall

SS-STRK-1430-RH

• ANSI/BHMA A 156.5 (1-1/4" x 4-7/8") fit cutout specification A 115.1 (with slight jamb modification)
• Stainless steel - Made in the USA
• 12 Vac / 12 Vdc
• Frame type: Hollow metal or aluminum jamb
• Corrosion - Resistant Housing and Moving Parts
• Tamper Strength of 1700 pounds
• Latch Opening is Below Center Line (BCL) and opening starts 3/8" below center line
• Cycle Test of 500,000 cycles
• Keeper depth of 5/8", maximum latch projection possible with 1/8" of door/frame clearance 3/4"
• Strike depth of 1.50" overall

SS-STRK-2400

• Stainless Steel Faceplate
• Frame Type - Hollow Metal, Aluminum or Wood
• Corrosion - Resistant case and moving parts
• Tamper Strength Test - 1500 lbs (700 kg)
• Cycle Test 1,000,000 cycles
• Keeper Depth - 1/2" Maximum Latch Projection possible with 1/8" Door/Frame Clearance - 5/8"
• Strike Depth 1.25" Overall
• Reversible - Non Handed
• Stainless Steel Keeper
• Easily converts from fail safe to fail secure and back

SS-STRK-2460

• Partial Surface Mount, a small hole (5 5/16″ x 1 7/16″) in the jamb
• Voltage: 12-28 VAC/VDC
• Latch Monitoring
• Locked or Unlocked Status Monitoring
• Holding Force: 1,500 lbs.
• Easily reversible from fail secure to fail safe with the movement of two external screws